UEE30811 Certificate III in Electrotechnology Electrician

UEE30811

Have you selected, installed, set up, tested, found faults, repaired and maintained electrical systems and equipment in building and premises?

Have you solved problems in electromagnetic devices and related circuits, fixed and secured electrotechnology equipment and installed low voltage wiring and accessories in residential and/or commercial industries etc.?

An RPL from Trades College Australia in Certificate III in Electrotechnology Electrician will empower you to the next step and your knowledge will be recognized by the industry you work in and other people in industries that you interact with.

RPL Course Summary
Code UEE30811
Course Certificate III in Electrotechnology Electrician
Location Punchbowl Campus
Duration Contact us for details
About

Scope

This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises. It includes ERAC requirements for an ‘Electrician’s licence’.

What you must have to be eligible for this qualification:

At least four years’ experience in working as an electrician under supervision.

Your future positioncould empower you to be an:

Electrician

How to Complete

You can complete this course via one of the following methods:

  • RPL
  • RPL + Gap Training
RPL Steps
  • Third Party Verification: You will need to supply references from two referees stating that you have been working in a mid to higher management position for at least two years
  • Evidence: You will need to supply videos, photos and/or documentation to support your business experiences
  • Verbal Assessment: Our qualified assessors will assess your knowledge in conjunction with your evidence to support
Units you must complete.

Units for Your RPL Qualification

Completion requirements

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

  • All the Core competency standard units, defined in the Core Competency Standard Units table below and
  • A combination of Elective competency standard units to achieve a total weighting of 140 points in accordance with the Elective Competency Standard Units table below.
Core (Must do units)
Unit Code Unit Title Weighting Points
UEENEEC020B Participate in electrical work and competency development activities 60
UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 20
UEENEEE102A Fabricate, assemble and dismantle utilities industry components 40
UEENEEE104A Solve problems in d.c. circuits 80
UEENEEE105A Fix and secure electrotechnology equipment 20
UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 40
UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 20
UEENEEG006A Solve problems in single and three phase low voltage machines 80
UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits 60
UEENEEG063A Arrange circuits, control and protection for general electrical installations 40
UEENEEG101A Solve problems in electromagnetic devices and related circuits 60
UEENEEG102A Solve problems in low voltage a.c. circuits 80
UEENEEG103A Install low voltage wiring and accessories 20
UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations 20
UEENEEG105A Verify compliance and functionality of low voltage general electrical installations 40
UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 40
UEENEEG107A Select wiring systems and cables for low voltage general electrical installations 60
UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 40
UEENEEG109A Develop and connect electrical control circuits 80
UEENEEK142A Apply environmentally and sustainable procedures in the energy sector 20
Total points in core 920
Elective Competency Standard Units

Complete Elective units to achieve a total of weighting of 140 points from the following groups:
Group Minimum points Maximum points
A Imported and Common Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

 0 60
B Qualification Elective Units You may select all your elective units from this Group 80 140
Group A – Imported and Common Elective Units

You may complete units to a maximum weighting of 60

 Weighting Points
UEENEEC001B Maintain documentation 20
UEENEEC002B Source and purchase material/parts for installation or service jobs 20
UEENEEC003B Provide quotations for installation or service jobs 20
UEENEEC010B Deliver a service to customers 20
UEENEED101A Use computer applications relevant to a workplace 20
UEENEEE009B Comply with scheduled and preventative maintenance program processes 20
UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 20
CPCCOHS1001A Work safely in the construction industry 10
HLTAID001 Provide cardiopulmonary resuscitation 10
HLTAID003 Provide first aid 10
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework

 Up to 60 points
Group B – Qualification Elective Units

Complete units to a minimum weighting of 80

You may select all your elective units from this Group

 Weighting Points
UEENEEA110A Assemble, mount and connect control gear and switchgear 40
UEENEEA112A Fabricate and assemble bus bars 40
UEENEEA113A Mount and wire control panel equipment 40
UEENEED104A Use engineering applications software on personal computers 40
UEENEEE121A Plan an integrated cabling installation system 40
UEENEEF102A Install and maintain cabling for multiple access to telecommunication services 120
UEENEEF104A Install and modify performance data communication copper cabling 40
UEENEEG110A Find and repair faults in LV d.c. electrical apparatus and circuits 60
UEENEEG111A Carry out basic repairs to electrical components and equipment 40
UEENEEG113A Install and maintain emergency safety systems 60
UEENEEG116A Diagnose and rectify faults in traction lift systems 80
UEENEEG118A Maintain operation of electrical mining equipment and systems 60
UEENEEG119A Maintain operation of electrical marine equipment and systems 60
UEENEEG120A Select and arrange equipment for special LV electrical installations 60
UEENEEG126A Install and maintain field power and distribution systems with a low voltage demand up to 200 A per phase 40
UEENEEG129A Overhaul and repair major switchgear and controlgear 60
UEENEEG150A Wind electrical coils 40
UEENEEG151A Place and connect electrical coils 40
UEENEEG152A Rewind single phase machines 40
UEENEEG153A Rewind three phase low voltage induction machines 60
UEENEEG154A Rewind LV direct current machines 60
UEENEEG157A Conduct electrical tests on LV electrical machines 40
UEENEEG159A Conduct mechanical tests on electrical machines and components 40
UEENEEG164A Repair and maintain mechanical components of electrical machines 40
UEENEEG165A Maintain and service traction lifts systems and equipment 40
UEENEEG166A Install and maintain escalators, moving walks and treadways 40
UEENEEG167A Align and install traction lift equipment 20
UEENEEG171A Install, set up and commission interval metering 20
UEENEEG181A Provide advice on effective and energy efficient lighting products 20
UEENEEG182A Supply effective and efficient lighting products for domestic and small commercial applications 40
UEENEEG183A Provide advice on the application of energy efficient lighting for ambient and aesthetic effect 20
UEENEEG189A Install and maintain emergency lighting systems 40
UEENEEH102A Repairs basic electronic apparatus faults by replacement of components 40
UEENEEH111A Troubleshoot single phase input d.c. power supplies 40
UEENEEH150A Assemble and set up basic security systems 80
UEENEEI140A Plan the electrical installation of integrated systems 20
UEENEEI141A Develop electrical integrated systems 20
UEENEEI101A Use instrumentation drawings, specification, standards and equipment manuals 40
UEENEEI102A Solve problems in pressure measurement components and systems 40
UEENEEI103A Solve problems in density/level measurement components and systems 40
UEENEEI104A Solve problems in flow measurement components and systems 40
UEENEEI105A Solve problems in temperature measurement components and systems 40
UEENEEI116A Assemble, enter and verify operating instructions in microprocessor equipped devices 20
UEENEEI150A Develop, enter and verify discrete control programs for programmable controllers 60
UEENEEJ102A Prepare and connect refrigerant tubing and fittings 30
UEENEEJ103A Establish the basic operating conditions of vapour compression systems 60
UEENEEJ104A Establish the basic operating conditions of air conditioning systems 20
UEENEEJ105A Position, assemble and start up single head split air conditioning and water heating heat pump systems 70
UEENEEJ172A Recover, pressure test, evacuate, charge and leak test refrigerants — split systems 60
UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems 20
UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems 40
UEENEEM019A Attend to breakdowns in hazardous areas — coal mining 20
UEENEEM020A Attend to breakdowns in hazardous areas — gas atmospheres 20
UEENEEM021A Attend to breakdowns in hazardous areas — dust atmospheres 20
UEENEEM022A Attend to breakdowns in hazardous areas — pressurisation 20
UEENEEM023A Install explosion-protected equipment and wiring systems — coal mining 60
UEENEEM024A Install explosion-protected equipment and wiring systems — gas atmospheres 60
UEENEEM025A Install explosion-protected equipment and wiring systems — dust atmospheres 60
UEENEEM026A Install explosion-protected equipment and wiring systems — pressurisation 60
UEENEEM027A Maintain equipment in hazardous areas — coal mining 60
UEENEEM028A Maintain equipment in hazardous areas — gas atmospheres 60
UEENEEM029A Maintain equipment in hazardous areas — dust atmospheres 60
UEENEEM030A Maintain equipment in hazardous areas — pressurisation 60
UEENEEM038A Conduct testing of hazardous areas installations — coal mining 40
UEENEEM039A Conduct testing of hazardous areas installations — gas atmospheres 40
UEENEEM040A Conduct testing of hazardous areas installations — dust atmospheres 40
UEENEEM041A Conduct testing of hazardous area installations — pressurisation 40
UEENEEM042A Conduct visual inspection of hazardous areas installations 40
UEENEEM076A Use and maintain the integrity of a portable gas detection device 20
UEENEEM077A Install and maintain the integrity of fixed gas detection equipment 20
UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area 20
UEENEEN102A Assemble and wire internal electrical rail signalling equipment 30
UEENEEN103A Install and maintain rail track circuit leads and bonds 30
UEENEEN104A Test copper rail signalling cables 20
UEENEEN121A Repair rail signalling power and control cables 40
UETTDRIS43A Perform low voltage field switching operation to a given schedule 50
UETTDRIS44A Perform HV field switching operation to a given schedule 50
UETTDRIS47A Sample, test, filter and reinstate insulating oil 40
UETTDRIS67A Solve problems in energy supply network equipment 80
UETTDRIS68A Solve problems in energy supply network protection equipment and systems 40
UETTDRSB23A Install and maintain substation direct current systems 30
UETTDRSB29A Maintain capacitor bank equipment for voltage regulation 40
UETTDRSB39A Perform power system substation switching operation to a given schedule 50

 

Note:

  1. Prerequisite pathways shall be identified and met for all elective units selected.
  2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

Ask our staff about the right elective units for your needs.